Skip to Content
Electrostatic Powder Coating · Batch Oven Cure · Blaine, MN

TRUE NORTH
SURFACE WORKS

Powder Coating — Full Service Price List
Electrostatic powder application with oven cure. Hundreds of colors available. Superior durability vs. liquid paint — chip, fade, and corrosion resistant. All prices based on single solid color unless noted. Parts must be fully disassembled prior to drop-off.
All pricing is for single solid color. Two-tone, candy, metallic, and specialty finishes carry a surcharge — see Multi-Color & Specialty section. Prep work (sandblasting, media blasting, strip & clean) is additional unless noted. Minimum job charge applies.
Prep & Additional Services ADD-ON
Surface Preparation & Add-On Services
Proper prep is critical for powder coat adhesion and longevity. Parts arriving clean, stripped, and media-blasted ready-to-coat receive the base prices listed throughout this guide.
$25–$45Per piece — ready to coat after
$45–$85Wheels, frames, medium components
$85–$150Large frames, racks, gates
+30%Of base coat price — heavy rust or old coating
+$25–$50Per piece — gloss or matte
$75
Automotive
Wheels & Rims
Single solid color per wheel. Tires must be removed prior to drop-off. TPMS sensors will be removed and reinstalled.
$95Per wheel — single color
$120Per wheel — single color
$150Per wheel — single color
$350Save vs individual pricing
$440Save vs individual pricing
$25/wheelAdditional service
Brake Calipers
Calipers must be fully disassembled — pistons, seals, and hardware removed. High-temp powder coating used on all caliper work.
$65Per caliper
$85Per caliper
$240Single color — save vs individual
Suspension, Frame & Chassis
Control arms, subframes, and chassis components. All hardware must be removed.
$55Each
$65
$175–$275Quoted by size
$1,200–$1,400Single color — quoted individually
$125–$175
$85–$125
Engine & Drivetrain Components
High-temp powder coating used on exhaust and heat-exposed components. Parts must be fully cleaned and degreased.
$85
$110
$75
$125High-temp powder
$85
$65Brackets, bolts, misc — up to 10 pcs
Motorcycle Parts
Motorcycle & Powersport Components
Frames, wheels, and components for motorcycles, ATVs, and UTVs. All parts must be fully disassembled prior to drop-off.
$275–$400Single color — quoted by size/complexity
$95
$175
$110
$95
$85–$125High-temp powder
$75–$125Per piece
$350–$500Quoted individually
$75
ATV & UTV Chassis Components
A-arms, skid plates, roll cages, nerf bars, and chassis components for ATVs and UTVs. Parts must be fully disassembled and clean prior to drop-off.
$65ATV/UTV size
$120
$225
$85–$125Quoted by size
$125–$175
Quote on requestPriced by tube length and complexity
$125–$175
$75
Quote on requestBundle pricing available
Bicycle Frames & Components
Bicycle Powder Coating
Steel, chromoly, and aluminum frames. Titanium and carbon fiber cannot be powder coated. All components must be fully stripped — bearings, cables, and hardware removed.
$175–$250Single color
$200–$275Single color
$150–$200
$75
$225–$325Bundle pricing
$45
$55
$150Tires removed
Furniture & Railings
Metal Furniture, Railings & Gates
Patio furniture, railings, gates, fencing, and decorative metalwork. Items must be disassembled as much as practical prior to drop-off.
$85–$125
$125–$200
$450–$650Quoted individually
$10–$15Standard balusters
$150–$250
$65
Industrial Parts & Equipment
Industrial & Commercial Components
Shelving, racks, brackets, machine components, and commercial equipment. Volume pricing available. Parts must arrive clean and ready to coat.
$85Same color — simple geometry
$150Volume rate
$125–$200
$150–$300Quoted by size
10% off standard rates
$75
Multi-Color & Specialty Finishes PREMIUM
Specialty Finish Surcharges
Applied on top of the base single-color price. Complex patterns quoted individually.
+50% of base priceMasking between colors
+50% of base priceTwo-step process required
+25% of base price
+$25–$50 per pieceGloss or matte
+$35–$75 per pieceColor match to sample or spec
Quoted individually
Rush Service
Rush Turnaround
Standard turnaround is 5–7 business days. Rush availability subject to current shop capacity and oven scheduling — call ahead to confirm.
5–7 business days
+30% of job total
+50% of job total — call to confirm
Notes & Terms: All pricing is for single solid color H-series powder unless otherwise noted. Specialty and two-step finishes carry additional charges as listed. Parts must be fully disassembled prior to drop-off. Parts should arrive clean and degreased — heavily contaminated parts may incur additional prep charges. Out-gassing may occur on cast aluminum and magnesium parts. Powder coating is permanent — customer approves color and finish before work begins. True North Surface Works is not responsible for pre-existing cracks, pitting, or structural defects. Volume and production pricing available. Ask about our Military & Law Enforcement Discount. Contact us at [email protected].